Constant Errors

The effect of a constant error becomes more serious as the size of the quantity measured decreases. The effect of solubility losses on the results of a gravimetric analysis, shown in Example 1.1, illustrates this behavior. Digital and computer displays on pH meters, laboratory balances, and other electronic instruments eliminate number bias because no judgment is involved in taking a reading.

However, many of these devices produce results with more figures than are significant. The rounding of insignificant figures can also produce bias.

Example 1.1

Suppose that 0.50 mg of precipitate is lost as a result of being washed with 200 mL of wash liquid. If the precipitate weighs 500 mg, the relative error due to solubility loss is 2(0.50/500) × 100% = -0.1%. Loss of the same quantity from 50 mg of precipitate results in a relative error of -1.0%.

The excess of reagent needed to bring about a color change during a titration is another example of constant error. This volume, usually small, remains the same regardless of the total volume of reagent required for the titration. Again, the relative error from this source becomes more serious as the total volume decreases. One way of reducing the effect of constant error is to increase the sample size until the error is acceptable.

مواضيع ذات صلة

الشكل الوضعي للسكريات الأحادية configuration of monosaccharides

نظام استخلاص الجزئيات البسيطة

اختيار الطور الجديد وعدد مرات الاستخلاص

ميكانيكية الاستخلاص

طبيعة الصنف المستخلص

الاستخلاص بالمذيب

امتصاص الشعاع الكهرومغناطيسي وطيف الامتصاص

الطرق الكيميائية الطيفية في التحليل.

طبيعة الكيمياء التحليلية

التحليل بالحقن الجرياني المتقطع Batch flow injection analysis

الحقن الجرياني متعدد التخفيف Multi-commutation in FIA

التحليل بالحقن المتعاقب Sequential Injection Analysis