Synthetic Petroleum-Based Polymers

The synthetic polymer industry represents the major end use of many petrochemical monomers such as ethylene, styrene, and vinyl chloride. Synthetic polymers have greatly affected our lifestyle. Many articles that were previously made from naturally occurring materials such as wood, cotton, wool, iron, aluminum, and glass are being replaced or partially substituted by synthetic polymers. Clothes made from polyester, nylon, and acrylic fibers or their blends with natural fibers currently dominate the apparel market. Plastics are replacing many articles previously made of iron, wood, porcelain, or paper in thousands of diversified applications. Polymerization could now be tailored to synthesize materials stronger than steel.  For example, polyethylene fibers with a molecular weight of one million can be treated to be 10 times stronger than steel!

However, its melting point is 148°C. A recently announced thermotropic liquid crystal polymer based on p-hydroxybenzoic acid, terephthalic acid, and p, pv-biphenol has a high melting point of 420°C and does not decompose up to 560°C. This polymer has an initial stress of 3.4 × 10⁶ kg/mm², even after 6,000 hours of testing.

The polymer field is versatile and fast growing, and many new polymers are continually being produced or improved. The basic chemistry principles involved in polymer synthesis have not changed much since the beginning of polymer production. Major changes in the last 70 years have occurred in the catalyst field and in process development. These improvements have a great impact on the economy. In the elastomer field, for example, improvements influenced the automobile industry and also related fields such as mechanical goods and wire and cable insulation.

This chapter discusses synthetic polymers based primarily on monomers produced from petroleum chemicals. The first section covers the synthesis of thermoplastics and engineering resins. The second part reviews thermosetting plastics and their uses. The third part discusses the chemistry of synthetic rubbers, including a brief review on thermoplastic elastomers, which are generally not used for tire production but to make other rubber products. The last section addresses synthetic fibers.

مواضيع ذات صلة

تقدير الكتل المولارية من إتزان الترسب

الأسموزية والديلزة Osmosis and dialysis

الحجم والشكل

الوزن الجزيئي للبوليمرات

البوليمرات المؤلفة من سلاسل رئيسة لا عضوية

البوليمرات ذات مجموعة الروابط الإقترانية

تصنيف مركبات الجزيئات الضخمة ذات السلاسل اللامتجانسة

تصنيف مركبات الجزيئات الضخمة الحاوية على سلاسل كربونية

تصنيف وتسمية مركبات الجزيئات الضخمة

الشكل الهندسي للبوليمر

البوليمرات المشتركة

البوليمرات المنتظمة فراغياً