Read More
Date: 29-3-2017
1253
Date: 21-4-2017
1562
Date: 25-3-2017
1986
|
Flow coolant
At low reactor power levels, changing the flow rate of the coolant through the reactor does not result in a measurable reactivity change because fuel and moderator temperatures and the fraction of steam voids occurring in the core are not changed appreciably.
When the flow rate is varied, however, the change in temperature that occurs across the core (outlet versus inlet temperature) will vary inversely with the flow rate. At higher power levels, on liquid cooled systems, increasing flow will lower fuel and coolant temperatures slightly, resulting in a small positive reactivity insertion. A positive reactivity addition also occurs when flow is increased in a two-phase (steam-water) cooled system. Increasing the flow rate decreases the fraction of steam voids in the coolant and results in a positive reactivity addition. This property of the moderator in a two-phase system is used extensively in commercial BWRs. Normal power variations required to follow load changes on BWRs are achieved by varying the coolant/moderator flow rate.
|
|
طبيبة تبدد 5 خرافات رئيسية عن تغذية الأطفال
|
|
|
|
|
وفاة أول رجل خضع لزراعة كلية خنزير.. والمستشفى يوضح الأسباب
|
|
|
|
قسم الصناعات والحرف: جميع أعمالنا تتمتع بالجودة والمتانة
|
|
الأمانة العامة للعتبة الكاظمية المقدسة تعقد الاجتماع التحضيري لزيارة الإمام الجواد "عليه السلام"
|
|
قبل افتتاحها بايام.. شاهد بالصور اكاديمية الثقلين للتوحد واضطرابات النمو في البصرة
|
|
قبل ايام من افتتاحه.. لقطات حصرية توثق اللمسات الاخيرة لإنجاز أحدث مستشفى لعلاج السرطان في البصرة تابع للعتبة الحسينية (صور)
|